The plug and perform simplicity of our stand-alone Triple Six synth has been carefully distilled into Eurorack format by hirsute hands. We designed a single module as powerful as an expensive array of traditional VCO/VCF/VCA modules patched together. While no compromise to the true spirit of the original circuit was afforded we worked especially hard to make this one of the most compatible Eurorack instruments available with a generous array of 9 distinct control voltage inputs:
- 2 for Twin Oscillators Freq.
- 1 for Threshold (Osc. Gate/Selection/Etc.)
- 4 for Twin Amplifiers (FX/2nd Osc.)
- 1 for Signal Shape parameter (filter)
- 1 for Output Drive parameter
- Plus audio input (modulation/filter/etc)
Added into the Euro-Format bargain are three additional new controls not available on the original:
- Shape-Knob
- Patch-Knob
- Three-way Patch Switch
In essence it is quite possible that this one module alone, placed under the control of up to 9 separate sequenced CV channels, could sound like someone slipped a C4 charge into Tonto’s “expanding headband”.
Audio Samples:- 666 Solo 1
- 666 with Reverb; Troggota & Fugue in D Minor
- A 666 M-series demonstration by Weinglas
- 666 with old Drum Machine patched to the Input
- 666 with Bob & Doug McKenzie
Notes with regard to the Weinglas audio demonstration (much obliged) as quoted from the same: “Input is one/permanent note from a sawtooth VCO; OSC1 CV is thereby modulated by the VCO. OSC2 CV is modulated from a gate signal every second beat of the clock; THRESHOLD is modulated every beat of the clock. That is the patch. After starting the clock, I only played with the switches for patch, cycle and threshold. Nothing else!”
Specs: Euro-Format / 14HP / Depth = 2” / Peak Current Draw < 125ma
Price: $325
Accessories
All Trogotronic instruments come complete with pretty much everything needed to “plug & play”. Still, herein are replacement parts should ever something go missing (plus a few extra options should ever such a fancy strike).














